firecracker-scripts

Opinionated wrapper scripts for running Firecracker microVMs with networking, SSH access, and easy updates — the minimal tooling for running agent sessions (Claude Code) inside firecracker VMs on a Linux + KVM host.

Seven small scripts and one sourced library, no runtime dependencies beyond standard Linux tools:

Script	What it does
prereqs.sh	Checks the host for KVM, TUN, nft, jq, etc. Run this first on a new machine.
update-firecracker.sh	Fetches/updates the firecracker binary and the guest kernel + Ubuntu rootfs.
start-vm.sh	Boots a networked microVM, prints the ssh command. Supports multiple concurrent VMs.
list-vms.sh	Shows running VMs: guest IP, TAP device, PID, config, and liveness.
stop-vm.sh	Cleanly shuts a VM down (orderly poweroff over SSH) and tears down its host networking.
share-dir.sh	Shares a host directory into a running VM, live, over NFSv4 (with --unmount).
auth-login.sh	Mints Anthropic platform credentials on the host for in-VM Claude Code (via ant).
lib-fcnet.sh	Sourced by the four VM scripts: VM-id derivation, API socket location, SSH options, and the host nftables ruleset. Not run directly.

Everything the scripts download or build — kernels, rootfs images, the guest SSH key, logs — lives inside this repo directory and is gitignored. Nothing touches ~/.ssh or personal keys.

THREAT-MODEL.md describes the trust boundaries, what is deliberately not defended, and the planned jailer work. Read it before pointing SHARE_DIR at anything you care about.

Prerequisites

• Linux x86_64 with KVM (/dev/kvm readable+writable by you) and the TUN module (/dev/net/tun)
• nftables (nft) for guest NAT — the scripts use nftables, not iptables
• A few standard tools: curl, jq, wget, ip, setsid, pgrep/pkill (procps), ping, tar, file, unsquashfs (squashfs-tools), mkfs.ext4 (e2fsprogs), ssh-keygen
• For agent sessions: ssh + nfs-utils (exportfs) on the host; firewalld (optional, opened automatically) and go (optional, auto-installs ant)
• sudo for: installing the firecracker binary, creating TAP devices, NAT rules, and building the ext4 rootfs

Run the check:

./prereqs.sh

On a minimal Fedora, install the obvious gaps with:

sudo dnf install squashfs-tools e2fsprogs nftables nfs-utils

If /dev/kvm exists but isn't accessible:

sudo usermod -aG kvm "$USER"   # then log out and back in

If /dev/net/tun is missing:

sudo modprobe tun

Quick start on a new host

Everything needed to go from a bare Linux box to Claude Code running inside a firecracker VM, in order:

# 1. requirements (checked in detail below): x86_64 + KVM, TUN, nftables,
#    nfs-utils, standard tools, sudo. On Fedora the gaps are usually:
#    sudo dnf install squashfs-tools e2fsprogs nftables jq wget nfs-utils

# 2. clone + verify the host
git clone git@github.com:pshickeydev/firecracker-scripts.git
cd firecracker-scripts
./prereqs.sh

# 3. fetch the firecracker binary + guest kernel/rootfs, then build the agent image
./update-firecracker.sh            # binary + images (~10 min, needs sudo)
./update-firecracker.sh agent      # DNS fix, nfs-common, Claude Code, 2 GiB,
                                   # apt state stripped — no package manager in
                                   # the running guest (~10 min)

# 4. mint credentials (browser OAuth; installs `ant` via go if missing)
./auth-login.sh

# 5. per session — boot with your workspace live-mounted, share credentials, run
SHARE_DIR=~/some/project ./start-vm.sh 0
./share-dir.sh 0 "$PWD/anthropic-config" /root/.config/anthropic
mkdir -p claude-sessions && ./share-dir.sh 0 "$PWD/claude-sessions" /root/.claude
ssh -t -i guest.id_rsa -o UserKnownHostsFile=.known_hosts root@172.16.0.2
     # then: cd /workspace && ANTHROPIC_PROFILE=fc-agents IS_SANDBOX=1 claude --dangerously-skip-permissions

What it installs on the host

The scripts keep everything they build (images, keys, logs, credentials) inside the repo dir — gitignored. But some host-level state is created; worth knowing before adopting:

Persistent (survives reboots)	Per-boot (created + torn down by the scripts)
/usr/local/bin/firecracker-<tag> + firecracker symlink	TAP device fc<N> + its /30 address
/etc/sysctl.d/99-fc-agents.conf (ip_forward=1)	nft fc-nat table (NAT, isolation, guest→host filtering)
/etc/exports.d/fc-agents.exports (one entry per shared dir; --unmount removes)	firewalld: TAP bound to the uplink's zone, intra-zone forwarding, per-guest NFS rich rule
nfs-server service enabled
~/go/bin/ant (only if go is present)

All firewalld changes are runtime-only and are undone on teardown: the TAP binding when its VM stops, the per-guest NFS rule on share-dir.sh --unmount, and intra-zone forwarding once the last VM stops. The scripts only undo what they turned on: stop-vm.sh removes the forward (runtime and permanent) when the .fw-forward-added marker says start-vm.sh enabled it and the last VM is gone — so on zones where intra-zone forwarding is already the distro default (Fedora's FedoraWorkstation among them) nothing is recorded and the default is left alone. Earlier versions wrote these with --permanent, which left --add-forward enabling forwarding for every interface in the zone indefinitely; because the marker postdates those versions, a permanent --add-forward they left behind on a zone where it isn't the default is not cleaned up automatically — remove it once by hand with sudo firewall-cmd --permanent --zone=<zone> --remove-forward. The cost of runtime-only is that a firewall-cmd --reload mid-session drops guest egress until the VM is restarted.

THREAT-MODEL.md lists these and the commands to remove them.

Second-machine caveats

• anthropic-config/ does not travel with the repo (gitignored — it holds live refresh tokens). On another machine, run ./auth-login.sh there. The same account can hold the profile refreshed from multiple hosts, but never keep two copies of the same profile mounted at the same time — refresh-token rotation would orphan one of them (the rotation hazard, below).
• The 172.16.0.0/24 range must not collide with an existing route on the host; if it does, change FC_SUBNET in lib-fcnet.sh and the matching derivation in start-vm.sh.
• Guest DNS is baked as 1.1.1.1/8.8.8.8 — fine unless the network blocks external resolvers.
• The firewalld and SELinux paths auto-detect; on hosts without them (e.g. Debian-family with ufw, no SELinux) the guards simply skip.
• The CI kernel/rootfs are x86_64-only.

Setup (detailed, per-command reference)

# 1. get the scripts
git clone git@github.com:pshickeydev/firecracker-scripts.git
cd firecracker-scripts

# 2. check the host
./prereqs.sh

# 3. install the firecracker binary + fetch the guest kernel/rootfs
./update-firecracker.sh            # = "all": binary + images
# or split it up:
./update-firecracker.sh binary
./update-firecracker.sh images

update-firecracker.sh is idempotent: it compares the installed version against the latest release and skips if already up to date (pass --force to reinstall/rebuild).

Agent sessions: Claude Code inside the VM

Full agent-session guide: design, per-session workflow, share-dir.sh reference, transcript sharing, and the three guest caveats (no git / no separate ripgrep / no package manager) are in docs/AGENT-SESSIONS.md.

Quick version:

# build agent image + mint credentials (once)
./update-firecracker.sh agent
./auth-login.sh

# per session — boot with workspace mounted, share auth, ssh in
SHARE_DIR=~/project ./start-vm.sh
./share-dir.sh 0 "$PWD/anthropic-config" /root/.config/anthropic
mkdir -p claude-sessions && ./share-dir.sh 0 "$PWD/claude-sessions" /root/.claude
ssh -t -i guest.id_rsa -o UserKnownHostsFile=.known_hosts root@172.16.0.2
# inside VM: cd /workspace && ANTHROPIC_PROFILE=fc-agents IS_SANDBOX=1 claude --dangerously-skip-permissions

Run a VM

# boot VM 0 (default) — creates TAP fc0, guest gets 172.16.0.2
./start-vm.sh

# ssh in
ssh -i guest.id_rsa -o UserKnownHostsFile=.known_hosts root@172.16.0.2

# see what's running (or stale)
./list-vms.sh

# stop it
./stop-vm.sh

Clean shutdown, concurrent VMs, and runtime details

Full reference — halt verification, concurrent VMs, IP assignment, environment overrides, file layout, firewall rules, IPv6 disable, SSH host keys, download integrity, and build-chroot architecture — is in docs/RUNTIME.md.

Quick reference:

# basic commands
./start-vm.sh [VM_ID]      # default 0
./list-vms.sh [VM_ID ...]
./stop-vm.sh [VM_ID]        # default 0

See docs/RUNTIME.md for the environment-override table, clean-shutdown design notes, and architecture details.

See docs/AGENT-SESSIONS.md for agent session workflow, and THREAT-MODEL.md for trust boundaries and planned jailer work.

Files

firecracker-scripts/
├── prereqs.sh
├── update-firecracker.sh
├── start-vm.sh
├── list-vms.sh
├── stop-vm.sh
├── share-dir.sh
├── auth-login.sh
├── lib-fcnet.sh           # sourced by the four VM scripts (not executable on its own)
├── image-pins.lock        # sha256 of artifacts that publish no checksum (committed)
├── README.md
├── docs/THREAT-MODEL.md
├── docs/
│   ├── AGENT-SESSIONS.md
│   └── RUNTIME.md
└── .gitignore

After ./update-firecracker.sh (plus agent), the repo directory also contains (all gitignored):

vmlinux-<version>          # guest kernel
ubuntu-<version>.ext4      # guest rootfs (agent step: 2 GiB, claude, nfs-common, apt state stripped)
ubuntu-<version>.squashfs.upstream
squashfs-root/             # extracted rootfs tree the ext4 is built from
guest.id_rsa / .pub        # dedicated SSH keypair (gitignored)
anthropic-config/          # ant profile + credentials for the guest (gitignored, SECRET)
claude-sessions/           # Claude Code transcripts shared out of /root/.claude (gitignored, optional)
vmlinux-latest             # -> vmlinux-<version>
ubuntu-latest.ext4         # -> ubuntu-<version>.ext4
ubuntu-latest.id_rsa       # -> guest.id_rsa
fc-vm*.log                 # per-VM serial console logs (mode 0600)
.known_hosts               # TOFU guest host keys; deleted on an images rebuild
.fw-forward-added          # marker: we enabled firewalld intra-zone forwarding