Tables not rendering in HTML

[ilovetogetspamed]

I'm trying to get the following MD document to render proper HTML. The ouput is not as I would expect. The tables are not rendering as I would expect. Let me know if I'm doing something wrong.

This is the input file:

CLEANING
=
| No.  | Important Parts for Cleaning    |  Cleaning Cycle | Ref. Figure
| ---:|---|---|---|
| 1 | Around the hook | Every day       | url_for_fig_1
| 2 | Guide rail to the take-up lever | Once a week | url_for_fig_2
| 3 | Around the movable blade and the fixed blade | Once in 3-7 days | url_for_fig_3
| 4 | X-Y drive pulley teeth and timing belt teeth | Once a month

OIL SUPPLY
=
1.  Oil supply   Use the SWF sewing machine oil (Spindle Oil) or ISO-standard VG18.
2.  Manual oil supply

    | No.  | Where To Oil    |  Oiling Cycle | Ref. Figure
    |---:|---|---|---|
    | 1 | Take the bobbin case out of the hook. Feed small1amount of oil on the raceway. | 3-4 times a day | url_for_fig_1
    | 2 | Needle bar and needle bar shaft | Once a week | url_for_fig_2
    | 3 | Inside the arm | Once a week | url_for_fig_3, url_for_fig_4
    | 4 | Guide rail to the take-up lever | Once a week | url_for_fig_5

This is the ouput html after I run $ python3 -m markdown2 test2.md > exportToHTML/test2.html:

<h1>CLEANING</h1>

<p>| No.  | Important Parts for Cleaning    |  Cleaning Cycle | Ref. Figure
| ---:|---|---|---|
| 1 | Around the hook | Every day       | url<em>for</em>fig<em>1
| 2 | Guide rail to the take-up lever | Once a week | url</em>for<em>fig</em>2
| 3 | Around the movable blade and the fixed blade | Once in 3-7 days | url<em>for</em>fig_3
| 4 | X-Y drive pulley teeth and timing belt teeth | Once a month</p>

<h1>OIL SUPPLY</h1>

<ol>
<li>Oil supply   Use the SWF sewing machine oil (Spindle Oil) or ISO-standard VG18.</li>
<li><p>Manual oil supply</p>

<p>| No.  | Where To Oil    |  Oiling Cycle | Ref. Figure
|---:|---|---|---|
| 1 | Take the bobbin case out of the hook. Feed small1amount of oil on the raceway. | 3-4 times a day | url<em>for</em>fig<em>1
| 2 | Needle bar and needle bar shaft | Once a week | url</em>for<em>fig</em>2
| 3 | Inside the arm | Once a week | url<em>for</em>fig<em>3, url</em>for<em>fig</em>4
| 4 | Guide rail to the take-up lever | Once a week | url<em>for</em>fig_5</p></li>
</ol>

Output from $ mdv test2.md

CLEANING
  ───  ────────────────────────────────────────────  ────────────────  ─────────────
  No.  Important Parts for Cleaning                  Cleaning Cycle    Ref. Figure
  1    Around the hook                               Every day         url_for_fig_1
  2    Guide rail to the take-up lever               Once a week       url_for_fig_2
  3    Around the movable blade and the fixed blade  Once in 3-7 days  url_for_fig_3
  4    X-Y drive pulley teeth and timing belt teeth  Once a month
  ───  ────────────────────────────────────────────  ────────────────  ─────────────

OIL SUPPLY
    1. Oil supply   Use the SWF sewing machine oil (Spindle Oil) or ISO-standard VG18.
    2. Manual oil supply
      ───  ──────────────────────────────────────────────────────────────────────────────  ───────────────  ────────────────────────────
      No.  Where To Oil                                                                    Oiling Cycle     Ref. Figure
      1    Take the bobbin case out of the hook. Feed small1amount of oil on the raceway.  3-4 times a day  url_for_fig_1
      2    Needle bar and needle bar shaft                                                 Once a week      url_for_fig_2
      3    Inside the arm                                                                  Once a week      url_for_fig_3, url_for_fig_4
      4    Guide rail to the take-up lever                                                 Once a week      url_for_fig_5
      ───  ──────────────────────────────────────────────────────────────────────────────  ───────────────  ────────────────────────────

[dmenisdev]

I have the same issue

[WillianBR]

So do I!

[mkabadjov]

Try specifying "--extras tables" : $ python3 -m markdown2 --extras tables foo.md > foo.html

See extras.

[jiquiame]

I have the same issue. I could circumvent it by removing the final | on the line with the ---, such as |---|---|---

Can the maintainers look into this? @trentm
In my opinion it's an important error, as quite misleading for a markdown that should be valid...

Example of failure: |cou | cou | \n |---|---| \n | c | c |

[arrol]

same Issue here, seems to be a trailing whitespace, after the final | on the line with the ---, so there is a difference between |---|---|---| and |---|---|---|