setRotation not working

[pagosacabin]

Arduino: 1.8.19 (Linux), Board: "ESP32 Dev Module, Disabled, Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS), 240MHz (WiFi/BT), QIO, 80MHz, 4MB (32Mb), 921600, None"

#include <GT911.h>
GT911 ts = GT911();

setup(){
ts.begin();
ts.setRotation(1);

.....
no matching function for call to GT911::setRotation(int)
I have tried 180 and 1 and nothing works.
I have version 0.2.1.

[alex-code]

The setRotation function takes an enum value so you'll need to use something like below.

ts.setRotation(GT911::Rotate::_0);
ts.setRotation(GT911::Rotate::_180);

[pagosacabin]

I'm having difficulties getting any sort of dbounce to work. I'm trying to create a soft keyboard everything thing I do with millis doesn't seem to work do you have dbounce built in to the library config items?

[alex-code]

You can check for touch and loop a delay until the touch is released.
e.g.

if (ts.touched(GT911_MODE_POLLING) {
  GTPoint p = ts.getPoint(0);
  while (ts.touched(GT911_MODE_POLLING)) {
    delay(10);
  }
  // Released 
}

[pagosacabin]

The Rotation is working. Thank you.
The Dbounce is working. Thank you.

I'm currently having an issue where when is rotation 0 the up left corner from 0,0 to 30,130 doesn't seem to respond when press.

Do you have any documentation on any of the config items? I'm using the same DFrobot Screen you are.

or if you might know what might be causing this issue.